Cat.6A Unshielded Patch Panel
The Category 6A patch panels have been designed around our tried and tested modular format. The unloaded 19inch patch panels give a precise and stylish presentation of the Cat 6A module in either black or brushed aluminium. Direct and induvidual earthing protection occurs upon insertion of the Cat 6A module .The module have an integral dust cover providing a fully shuttered patch panel presentation. The module design prevents interference between the modules.
The IDC section of the Patch Panels consist of V-shaped contacts that flex not fatigue when terminated. Each port features a patented spring-loaded shutter. The patch panel works as a conventional patch panel when not connected to the system. The patch panel is Category 6A compliant and meets the relevant cabling standards for category 6A performance.
Features:
Category 6A compliant
Available in 24 Port 1U
High performance
High density modular concept
Fully shuttered presentation when loaded
Removable rear cable management included
Category 6A performance when installed as a complete Cat 6A Shielded System
RoHS Compliant
Mechanical Characteristics
Plastic Housing: Polycarbonate, UL94V-0 rated
Operating Life: Minimum 20 reterminations
Contact Material: Copper Alloy
IDC Contact Plating: Tin Matte finish
Contact Force: 100g minimum
Wire Accommodation: 22-24 AWG solid
Material: CRS (cold rolled steel)
Thickness: 1.52mm (.060")
Operating Life: Minimum 750 insertion cycles
Contact Material: Copper Alloy
Contact Plating: 1.25 micrometers Au/Ni
Contact Force: 100g minimum
Electrical Characteristics
Interface Resistance: 20mΩ
Initial Contact Resistance:2.5mΩ
Insulation Resistance: >100 MΩ