Cat.5E Shielded Patch Panel

The Category 5e Shielded Patch Panels comply with the requirements of the Category 5e specification. Each panel is designed to be quick and easy to install and maintain, with 24 Ports per 1U of rack space. A built in rear management tray, fulfils a number of functions: firstly, it relieves any stress that may be applied to the cable during and after installation; to allow trouble free termination the IDC blocks are positioned on the tray, at a 90? angle to the RJ45 sockets; finally at the rear of each tray,an adjustable clamping plate provides a quick and effective grounding position for the cables entering the panel. A screw on top plate, is supplied to complete the installation.

The Cat.5e RJ45 patch panels are a high performing, high density easy to install modular design patching system available in 16, 24, 32 and 48 ports. The panels have increased EMC protection via direct and individual earthing connections upon insertion of the Cat.5e module (FTP and STP). Identification is made simple using coloured caps and the label identity space. The integrated cable management tray reduces strain on cable maintaining the performance of the connection. All Cat5e patch panels are compatible with the Cat 5e range of tool-less module、faceplate and patch panel.

Features:

-Category 5e compliant

-High performance

-High density modular concept

-Fully shuttered presentation when loaded

-Direct and individual earthing connection upon insertion of jacks (FTP and STP shielded)

-Total shielding on STP 360

-24 Ports 1U

-EIA 568A/B wired

-Standard 19" rack mount

-Pointed IDC towers to speed termination and enhance cable retention

-Integral cable management shelf ensures bend radius compliance

-360o shielded shuttered DataGate Plus component compliant connector

 

Mechanical Characteristics
Operating Life:                              Minimum 500 insertion cycles
Contact Material:                          Phosphor Bronze
Contact Plating:                            1.25 micrometres Au/Ni
Material:                                        UL 94VO Thermoplastic
Wire Accommodation:                  22-26 AWG solid or stranded

 

Electrical Characteristics
Interface Resistance:                   20 milliohms
Initial Contact Resistance:           2.5 milliohms
Insulation Resistance:                 >100 Megaohms

 


    Performance

     

Copyright © 2022 xgoal.co.uk All rights reserved. 沪ICP备14044410号-1