IMS Controller

XGOAL IMS scanners work with the IMS server application software and IMS patch panels to co-ordinate work order management, provide LED patch guidance, and to sense and convey the status of connectivity at work area outlets to the IMS server. Each 1U scanner can be connected to up to 48 patch panels providing monitoring of up to 576 separate physical channels in a single cross-connect zone or 1152 channels in an interconnect zone. An unlimited number of scanners can be administered by the IMS server in a single site.

In the event that the IMS application cannot communicate with a scanner, the scanner records transactions in a queue for later delivery to the IMS software. Scanners recover from power outages without requiring reconfiguration. IMS scanners consume little power, which can be critical in power-hungry environments such as Data Centers.


-Simple configuration

-High port density: 1U scanner supports up to 576 cross connect channels or 1152 interconnect channels.

-Low power consumption minimizes heat generation

-Web interface for administration.

-Automatic synchronization with IMS Server after outage or system failure

-Transaction queues record events for later delivery in the event communication with the IMS Server is disrupted.

-Scanner can be connected to IMS panels and tested for proper operation without requiring connection to IMS Server.

-Communication bus connection between the scanner and patch panel is via an industry standard RJ45 patch cord

Capacity:                            576 cross connect channels or 1152 interconnect per scanner, one scanner per zone

Universal AC input:            110 Vac - 240 Vac, 50-60Hz

Operating Conditions:        0 to 50oC (32 to 122oF), 15-90% Relative Humidity non-condensing

Storage Conditions:           -10 to 60oC (14 to 140oF), 10 to 95% Relative Humidity non-condensing

Emissions:                         FCC Part 15 Class B, EN55022 Class B

Safety:                               UL/CSA 60950-1, IEC 60950-1, EN 60950-1

Ethernet Interface:             Two RJ45 Network Interface Controller (NIC) ports - dual speed 10/100 Base-T Ethernet

Communication Bus Ports:48 RJ45 ports on the rear for data communication and power connection to IMS patch panels. all rights reserved

Copyright © 2015-2016