Cat.6A FTP Cable

XGOAL cat.6A cable is a 4pr S/FTP with individual pair foils and an overall braid offering superior performance in terms of ACR. It is fully compliant with the Category 6A standards and when installed together with the cat.6A connector as a system is guaranteed to exceed all channel requirements in all configuration scenarios


XGOAL Cat 6A cables have been constructed with general shielding and/or shielding by pair offering to ensure excellent immunity to alien crosstalk to 500 MHz.

Applications:

-Ideal in mission critical installations

-MOD

-Finance

-Data Centers

-IEEE 802.3 10G BASE-T

 

Features:

-Meets or exceeds the requirements of IEC 61156-5 Category 7 component standards at swept frequencies up to 1000 MHz

-Installer friendly length markings on cable sheath

-Easy to handle round shape

-Low smoke zero halogen (LSOH)

-Exceeds requirements of ISO 11801 Class EA and ANSI/TIA-568-C.2 Category 6A channel standards

-Meets requirements of IEEE 802.3af and IEEE 802.3at for PoE applications

-Flame rated to meet IEC 60754-1, IEC 60754-2, IEC 61034-2, IEC 60332-3-24

-Descending cable length markings enable easy identification of remaining cable which reduces installation time and cable scrap

-Packaged on a reel


Mechanical characteristics

Conductor insulation                                                       Halogen-free foam-skin material

Outer jacket                                                                     Halogen-free, flame retardant

Area/range of application                                                Dry and dump rooms

Temperature range (installation)                                     0 °C to 50 °C

Operating temperature                                                    -20 °C to 60 °C

Min. bending radius for one-time bending                       ≥22 mm (for 2 or 3x (4x2...) over flat side)

Min. bending radius during installation                            ≥60 mm (for 2 or 3x (4x2...) over flat side)

Copper conductor                                                            AWG 23

 

Electrical characteristics

Largest resistance margin                                               1 %

Insulation resistance                                                        >5000 M? x km

Impedance Zo at 0.064 MHz                                           125  +/- 20%

Impedance Zo at 1-100 MHz                                           100  +/- 15%

Surface transfer impedance                                             <10 mΩ/m at 10 MHz

Unbalance to ground dB/ref. length = 1000 m                 >46 dB at 64 kHz

Unbalance to ground dB/ref. length = 100 m                   >40 dB at 1 MHz

Propagation velocity at >10 MHz (NVP*c)                       0.79 * c

Propagation delay a10 MHz                                             4.2 ns/m

Delay skew                                                                       4 ns/100 m


www.xgoal.com.cn all rights reserved

Copyright © 2015-2016