High Density Patch Panel
The XGOAL 24 Port 0.5U Patch Panel delivers a high density offering with the benefit of a single row of module. The single row of jacks means that the installation is straight forward and allows an individual jack to be removed if required. As the panel is only 0.5U in height it allows, by using two panels together, the ability to present 48 keystone jacks in 1U of rack space. Using two 0.5U panels ensures that the jacks are all aligned the correct way up. Most 48 Port 1U panels require the bottom row of jacks to be mounted upside down.
XGOAL Cat.5e High Density Patch Panels are ideal for ISP applications or installations where cabinet/rack space is at a premium. Providing 48 ports in 1U, these patch panels offer an integral rear cable management tray specifically designed for neat and easy cable dressing. The front of the panel has a protected labeling facility for clear port labeling. Suitable for high speed data transmission, this panel was designed to meet the highest performance standards in the industry, utilizing the principle of measurement and testing. XGOAL’s patented IDC is dual color coded allowing for 568A and 568B wiring and is terminable using industry standard tooling. Fixing kit, cable ties and installation instructions are included.
Features:
-Category 5e performance
-High Density ‐ 24 Jacks 0.5U
-PCB Mounted KATT IDC
-EIA 568A/568B wired
-RJ45 module
-Standard 19” rack mounted
-Graphite grey textured finish
Mechanical ：
Operating Life: Minimum 1000 insertion cycles
Contact Material: Copper based alloy
Contact Plating: 1.25 micrometers Au/Ni
Material: UL Listed Connector
Operating Lcharacteristicsife: Minimum 200 reterminations
Contact Material: Copper based alloy
Contact Plating: Sn/Pb over Ni
Wire Size: 22-26 AWG solid or stranded
Electrical characteristics:
Resistance： <20mΩ
D.C. Resistance Imbalance： <2.0mΩ
Insulation Resistance： >100MΩ
Contact Us
Legal Notices
Pribacy Plilcy