Fiber trunks shall be compatible with low-loss MPO connectors and LC, MTRJ, and SC fiber connectors. Trunks shall be available in plenum and plenum armor versions with fiber counts of 12, 24, 48, 72, 96, and 144. Trunk length shall be specified from connector to connector. Connector staggers and pulling eyes can be specified. All fiber trunks shall be 100% tested for insertion loss and test documentation shall be provided with every assembly.

Applications:

IEEE 802.3 40GBaseSR4/100GBaseSR10
IEEE 802.3 10GBase-SR/SW 10Gbps
IEEE 802.3 10Gbase-LX4 10Gbps
Fibre Channel 400-M5-SN-1 4Gbps
Fibre Channel 1200-M5E-SN1 10Gbps
Fibre Channel FC-PH 1Gbps
IEEE 802.3 1000Base-SX/LX 1Gbps
FDDI 100Mbps
IEEE 802.3 FOIRL 10Mbps
IEEE 802.3 10Base-F 10Mbps
ATM 155 Mbps, 622 Mbps, 1.2 Gbps. 2.4 Gbps

Features:

- Small outside diameter eases installation in cabinets and cable pathways

- Cable is factory terminated and 100% tested for continuity and insertion loss

- Available in plenum and plenum armor jacket material

- Available in 12, 24, 48, 72, 96, and 144 fiber counts?

- Fiber types include OM3, OM4, OM4+, and OS2 bend-insensitive fiber

- Standard breakout lengths can be staggered to ease installation

- The breakout point is designed to be sturdy while maintaining a small footprint diameter

- LSZH option available

- Pulling eyes are provided as an option to protect the fiber ends during installation

?Mechanical Characteristics:
Durability：                                                     1,000 Cycles
Guide Pin Retention：                                    3 lbs
Nominal Outside Diameter：                          4.5 mm (0.177 in)
Maximum Long Term Tensile Load：             90 lbf (440 N)
Operating Temp：                                           -0° to 70°C (32°F to 158°F)
Storage Temp：                                              -40° to 70°C (-40°F to 158°F)
Installation Temp：                                         -0° to 70°C (32°F to 158°F)

Electrical/Optical Characteristics:

Maximum Insertion Loss：
OM1, OM2, OM3 Standard Construction：      0.6dB
OM3, OM4 Low Loss Construction：               0.35dB
OS1/2 Standard Construction：                       0.75dB
OS1/2 Low Loss Construction：                       0.35 dB
Return Loss：
OS1/2 Standard Construction：                       >60dB
OS1/2 Low Loss Construction：                       >60dB
Attenuation：
Multimode OM1, OM2, OM3, OM4：                3dB@850nm/ 1.5dB@1300nm
Single Mode OS1/2：                                       0.25dB @1300nm or 1550nm