Cat.5E Unshielded Patch Panel

Category 5e patch panels comply with the EIA TIA Standard for enhanced Category 5 and are available in a choice of port density. Each panel offers a choice of labelling with the option to use the screen printed fields on the panel facia or the slide label system which is enclosed with each panel. Ease of installation is assured with ample rear cable management positions and IDC blocks allowing use of Krone tooling.

?The Cat.5e patch panels are easy-to-use panels offering 24 ports in 1U, ideal for reliable, fast installation. The panels have a removable rear cable manager for cable strain relief and correct guiding of cables to the point of termination. Rounded edges on the front plate provide an aesthetic appearance and improved mechanical strength. A full fixing kit is provided and wires can be punched down with either LSA or 110 tools. Panels are available in black and have post numbering and space for individual port labelling.


-24 Ports 1U

-EIA 568A/B wired

-ETL verified

-Standard 19" rack mount

-IDC contacts that flex not fatigue when terminated

-Pointed IDC towers to speed termination and enhance cable retention

-Integral cable management shelf ensures bend radius compliance

?Mechanical characteristics:
Operating Life:                                   Minimum 500 insertion cycles
Contact Material:                               Phosphor Bronze
Contact Plating:                                 1.25 micrometres Au/Ni
Material:                                             UL 94VO Thermoplastic
IDC Connector Operating Life:          Minimum 100 Reterminations
Contact Material:                               Phosphor Bronze
Contact Plating:                                 Sn/Pb over Ni
Wire Accommodation:                       22-26 AWG solid or stranded

Electrical characteristics:
Resistance:                                       <20mΩ
D.C. Resistance Imbalance:             <2.0mΩ
Insulation Resistance:                      >100MΩ all rights reserved

Copyright © 2015-2016