OM3 50/125 patch cord
Patch cord are used for non-permanent connections between patch panels, transmission equipment, etc. Pre-assembled cables allow for the implementation of complete Plug & Play solutions. When such a solution is adopted with accurate dimensioning and appropriate cable routing, it is possible to install even large cabling systems rapidly.
Each cable has strain relief boots to prolong and maintain performance levels of the assembly, transmit and receive 'legs' of each duplex cable are identified by means of ring type cable marker fixed to each end the assembly. A short distance from these identification rings heat shrink is applied to maintain an easy to manage bonded two fibre cable, finally a label containing a unique batch number is fixed to the centre of cable for quality and traceability purposes.
Features:
LSZH rated cables
Zirconium Ceramic Ferrule
Connectors and Cables according to IEC standards
PC, UPC and APC end finish
Pigtails with semi-tight buffer
OM3 Multimode performance
Standard or custom assemblies
Precision ferrule endface geometry
Controlled fiber protrusion
Factory polished, tested and serialized
Patch cord cable is according to IEC 60794-2-50
Maximum insertion loss according to IEC 61300-3-4: 0.3 dB
Typical insertion loss: 0.15 dB
Minimum return loss according to IEC 61300-3-6: 30 dB
OM3 performance: compliant to IEC60793-2-10, subtype A1a.2
Duplex LC-LC, duplex LC-SC and duplex LC-ST patch cords have a duplex cable construction with a diameter of 2 X 2.0 mm.
Duplex SC-SC, duplex SC-ST and duplex ST-ST patch cords have a duplex cable construction with a diameter of 2 X 3.0 mm.