MPO Discrete&Hybrid Trunking Cable

Plug and Play Advanced Fiber Optic Systems offer premium factory-controlled optical performance, enable flexible system configuration and fast, economical installation. ModLink is ideal for mission critical applications such as Data Centers and Storage Area Networks, applications where fast installation is paramount and environments where moves adds and changes are frequent or managed in-house.

MPO-LC trunk cables are Pre-Terminated to ensure the highest quality factory finish and to allow rapid ‘plug and play’ installation of high density cabling. The cables have an MPO connector on one end fanning out to individual LC connectors on the other. They are used to interconnect the MPO cassette modules either directly to active equipment or to LC module panels. Each cable has 12 fibres of either multimode OM3 or OM4 or singlemode OS2 and is available in a range of lengths to suit most applications.


- Small outside diameter eases installation in cabinets and cable pathways

- Cable is factory terminated and 100% tested for continuity and insertion loss

- Available in plenum and plenum armor jacket material

- Available in 12, 24, 48, 72, 96, and 144 fiber counts

- Fiber types include OM3, OM4, OM4+, and OS2 bend-insensitive fiber

- Standard breakout lengths can be staggered to ease installation

- The breakout point is designed to be sturdy while maintaining a small footprint diameter

- LSZH option available

- Pulling eyes are provided as an option to protect the fiber ends during installation

Mechanical Characteristics:
Durability:                                                     1,000 Cycles
Guide Pin Retention:                                    3 lbs
Nominal Outside Diameter:                          4.5 mm (0.177 in)
Maximum Long Term Tensile Load:             90 lbf (440 N)
Operating Temp:                                           -0° to 70°C (32°F to 158°F)
Storage Temp:                                              -40° to 70°C (-40°F to 158°F)
Installation Temp:                                         -0° to 70°C (32°F to 158°F)

Electrical/Optical Characteristics:
Maximum Insertion Loss:
OM1, OM2, OM3 Standard Construction:      0.6dB
OM3, OM4 Low Loss Construction:               0.35dB
OS1/2 Standard Construction:                       0.75dB
OS1/2 Low Loss Construction:                       0.35 dB
Return Loss:
OS1/2 Standard Construction:                       >60dB
OS1/2 Low Loss Construction:                       >60dB
Multimode OM1, OM2, OM3, OM4:                3dB@850nm/ 1.5dB@1300nm
Single Mode OS1/2:                                       0.25dB @1300nm or 1550nm all rights reserved

Copyright © 2015-2016