Each cable has strain relief boots to prolong and maintain performance levels of the assembly, transmit and receive 'legs' of each duplex cable are identified by means of ring type cable marker fixed to each end the assembly. A short distance from these identification rings heat shrink is applied to maintain an easy to manage bonded two fibre cable, finally a label containing a unique batch number is fixed to the centre of cable for quality and traceability purposes.

Features：

LSZH rated cables

Zirconium Ceramic Ferrule

Connectors and Cables according to IEC standards

PC, UPC and APC end finish

Pigtails with semi-tight buffer

OM1 Multimode performance

Standard or custom assemblies

Precision ferrule endface geometry

Controlled fiber protrusion

Factory polished, tested and serialized

Patch cord cable is according to IEC 60794-2-50

Maximum insertion loss according to IEC 61300-3-4：0.3 dB

Typical insertion loss：0.15 dB

Minimum return loss according to IEC 61300-3-6：30 dB

OM1 performance： compliant to IEC60793-2-50, subtype A1.3

Duplex LC-LC, duplex LC-SC and duplex LC-ST patch cords have a duplex cable construction with a diameter of 2 X 2.0 mm.

Duplex SC-SC, duplex SC-ST and duplex ST-ST patch cords have a duplex cable construction with a diameter of 2 X 3.0 mm.