The SpeedNet Cat.7S/FTP 800/23 cable is designed for applications up to 800 MHz and its transmission characteristics exceed Category 7 specifications according to EN 50288-4-1 and IEC 61156-5.

High system margins for the complete link according to ISO/IEC 11801 (2002) and EN 50173-1 (2003) will be achieved by using corresponding hardware together with this high-end copper cable.

Due to the very low delay skew between the pairs these SpeedNet Cat.7 cables are especially suitable for Gigabit Ethernet and also for transmission of digital data for future applications up to 10 Gigabit Ethernet according to IEEE 802.3an.

Each pair is individually foil shielded. The stranded pairs (PiMF) are also sheathed with a braid shield (S/FTP), which guarantees outstanding shielding characteristics. The cable satisfies Class B interference radiation standards according to EN 55022, as well as immunity according to EN 55024, which enables the realisation of CE-compatible networks.

The SpeedNet Cat.7 S/FTP 800/23 cable is also available in a triplex version. The compact construction allows flat as well as folded installation.

Applications:

Ideal in mission critical installations

MOD

Finance

Data Centres

IEEE 802.3 10G Base-T

Features:

-S/FTP 800/23 copper cable specified up to 800 MHz

-Fulfills all requirements of category 7 according to EN 50288-4-1 and IEC 61156-5

-Ensures high system margins according ISO/IEC 11801 Ed.2.2 (2011) and EN 50173 series (2011)

-Suitable for 10 Gigabit Ethernet according to IEEE 802.3 an

-Supports Power over Ethernet (PoE / PoE+)

-Each twisted pair is shielded with aluminum foil (PIMF), low skew between the pairs

-Overall shielding with tinned copper wire braiding

-Flame retardant according to IEC 60332-3-24 and EN 50266-2-4 (FR), non-corrosive according to IEC 60754-2 (NC) and EN 50267

-Low smoke according to IEC 61034 and EN 50268; halogen-free (ZH/0H), no development of toxic gases in case of fire

-Satisfies Class B interference radiation as well as immunity standards (EN 55022 and EN 55024)

Mechanical characteristics:

Conductor insulation                                                  Halogen-free foam-skin material

Outer jacket                                                                Halogen-free, flame retardant

Area/range of application                                           Dry and dump rooms

Temperature range (installation)                                0 °C to 50 °C

Operating temperature                                                -20 °C to 60 °C

Min. bending radius for one-time bending                  ≥23 mm (for 2 or 3x (4x2...) over flat side)

Min. bending radius during installation                       ≥60 mm (for 2 or 3x (4x2...) over flat side)

Copper conductor                                                       AWG 23

Electrical characteristics:

Largest resistance margin                                          1 %

Insulation resistance                                                   >5000 M? x km

Impedance Zo at 0.064 MHz                                      125  +/- 20%

Impedance Zo at 1-100 MHz                                      100  +/- 15%

Surface transfer impedance                                        <10 mΩ/m at 10 MHz

Unbalance to ground dB/ref. length = 1000 m            >46 dB at 64 kHz

Unbalance to ground dB/ref. length = 100 m              >40 dB at 1 MHz

Propagation velocity at >10 MHz (NVP*c)                  0.79 * c

Propagation delay a10 MHz                                        4.2 ns/m

Delay skew                                                                  4 ns/100 m